GL3000PM Manual Adjust Road Striping Guidance Laser
GL3000PM MANUAL SYSTEM
Gun Carriage Guidance – The GL3000PM laser is used to give the operator “heads up” time to move the gun carriage in and out for easy and precise alignment.
The GL3000PM Guidance Laser uses an ultra high visibility green laser to establish visual line control. Used for highway paint striping, asphalt pavers, road wideners, pavement profilers, or virtually any application requiring vehicle line control. The GL3000PM is also particularly effective for gun carriage alignment on paint striping trucks.
Airport Striping with Guidance Lasers
It’s more versatile, easier, faster and SAFER!
✓ Quick heads up, allows the operator to line up ahead of time while traveling through intersections.
✓ You are looking in your natural driving field of view at the reference point.
✓ You can reduce or eliminate pre-marking and the high cost associated with it.
✓ Eliminates using booms, chains and cameras.
✓ Greatly increases the machines maneuverability.
✓ Much less strain on the gun carriage operator. It reduces fatigue and increases skill load.
THE GL3000PM PACKAGE INCLUDES
P/N 3001 0001 1 GL3000PM Main Housing: IP68 waterproof, purged and dry nitrogen filled. Contains optic plate mounting platform with microprocessor electronics, laser mounting assembly, laser driver board, automatic cooling heating system and optics.
P/N 3000-0008 Interconnect Control Cable: 25 foot waterproof mil spec in line connector mounted between the laser main housing and the control panel mounted in the cab.
P/N 3001-0007 Control Panel allows the operator to turn the laser on, off, steady mode or blinking mode. Includes; 15 feet of 12 volt DC cable running from the control box for
connection to 12 volt vehicle power.
P/N 3000-0435 Laser Enhancement Glasses: Cuts down on glare and enhances the visibility of the laser spot for daytime use.
P/N 3001-0080 Owner Operator’s Manual
Optional: P/N 3001 0008 Dual Function Control Box: Controls two GL3000PM lasers simultaneously. Featuring a master On /Off control switch, plus two control buttons, allowing the operator to choose desired modes separately , such as; steady mode , b linking mode or stand by On/Off mode. Includes ; 15 feet of 12 volt DC cable